SP system map (before the 1988 DRGW merger)
|Locale||Arizona, Arkansas, California, Colorado, Illinois, Kansas, Louisiana, Missouri, Nevada, New Mexico, Oklahoma, Oregon, Tennessee, Texas, Utah|
|Dates of operation||
|Predecessor||Central Pacific Railroad|
|Successor||Union Pacific Railroad (in name only)
Some former SP tracks are now operated by BNSF Railway
|Track gauge||with some gauge branches|
|Headquarters||San Francisco, California|
The Southern Pacific (reporting mark SP) (or Espee from the railroad initials- SP) was a name of multiple American Class I railroads that existed from 1865 to 1998 and all operated in the Western United States. The names that represented the Southern Pacific were Southern Pacific Railroad, Southern Pacific Company and Southern Pacific Transportation Company.
The original Southern Pacific began in 1865 as a land holding company. The last incarnation of the Southern Pacific, the Southern Pacific Transportation Company, was founded in 1969 and took over the Southern Pacific system. The Southern Pacific Transportation Company was taken over by the Union Pacific Corporation and merged with their Union Pacific Railroad. The Southern Pacific Transportation Company was the surviving railroad as it absorbed the Union Pacific Railroad and changed its name to "Union Pacific Railroad", the Southern Pacific Transportation Company is now the current incarnation of the Union Pacific Railroad.
The Southern Pacific legacy founded important hospitals in San Francisco, Tucson, Arizona, and elsewhere. In the 1970s, it also founded a telecommunications network with a state-of-the-art microwave and fiber optic backbone. This telecommunications network became part of Sprint, a company whose name came from the acronym for Southern Pacific Railroad Internal Networking Telephony.
The original Southern Pacific, Southern Pacific Railroad, was founded as a land holding company in 1865, later acquiring the Central Pacific Railroad through leasing. By 1900, the Southern Pacific system was a major railroad system incorporating many smaller companies, such as the Texas and New Orleans Railroad and Morgan's Louisiana and Texas Railroad. It extended from New Orleans through Texas to El Paso, Texas, across New Mexico and through Tucson, to Los Angeles, through most of California, including San Francisco and Sacramento. Central Pacific lines extended east across Nevada to Ogden, Utah, and reached north through Oregon to Portland. Other subsidiaries eventually included the St. Louis Southwestern Railway (Cotton Belt), the Northwestern Pacific Railroad at 328 miles (528 km), the 1,331-mile (2,142 km) Southern Pacific Railroad of Mexico, and a variety of narrow gauge routes. The SP was the defendant in the landmark 1886 United States Supreme Court case Santa Clara County v. Southern Pacific Railroad which is often interpreted as having established certain corporate rights under the Constitution of the United States. The Southern Pacific Railroad was replaced by the Southern Pacific Company and assumed the railroad operations of the Southern Pacific Railroad. In 1929, Southern Pacific/Texas and New Orleans operated 13848 route-miles not including Cotton Belt, whose purchase of the Golden State Route circa 1980 nearly doubled its size to 3,085 miles (4,965 km), bringing total SP/SSW mileage to around 13,508 miles (21,739 km).
In 1969, the Southern Pacific Transportation Company was established and took over the Southern Pacific Company; this Southern Pacific railroad is the last incarnation and was at times called "Southern Pacific Industries", though "Southern Pacific Industries" is not the official name of the company. By the 1980s, route mileage had dropped to 10,423 miles (16,774 km), mainly due to the pruning of branch lines. In 1988, the Southern Pacific Transportation Company (including its subsidiary, St. Louis Southwestern Railway) was taken over by Rio Grande Industries, the parent company that controlled the Denver and Rio Grande Western Railroad. Rio Grande Industries did not merge the Southern Pacific Transportation Company and the Denver and Rio Grande Western Railroad together, but transferred direct ownership of the Denver and Rio Grande Western Railroad to the Southern Pacific Transportation Company, allowing the combined Rio Grande Industries railroad system to use the Southern Pacific name due to its brand recognition in the railroad industry and with customers of both the Southern Pacific Transportation Company and the Denver and Rio Grande Western Railroad. A long time Southern Pacific subsidiary, the St. Louis Southwestern Railway was also marketed under the Southern Pacific name. Along with the addition of the SPCSL Corporation route from Chicago to St. Louis, the total length of the D&RGW/SP/SSW system was 15,959 miles (25,684 km). Rio Grande Industries was later renamed Southern Pacific Rail Corporation.
By 1996, years of financial problems had dropped Southern Pacific's mileage to 13,715 miles (22,072 km). The financial problems caused the Southern Pacific Transportation Company to be taken over by the Union Pacific Corporation; the parent Southern Pacific Rail Corporation (formerly Rio Grande Industries), the Denver and Rio Grande Western Railroad, the St. Louis Southwestern Railway and the SPCSL Corporation was also taken over by the Union Pacific Corporation. The Union Pacific Corporation merged the Denver and Rio Grande Western Railroad, the St. Louis Southwestern Railway and the SPCSL Corporation into their Union Pacific Railroad, but did not merge the Southern Pacific Transportation Company into the Union Pacific Railroad. Instead, the Union Pacific Corporation merged the Union Pacific Railroad into the Southern Pacific Transportation Company in 1998; the Southern Pacific Transportation Company becomes the surviving railroad and at the same time the Union Pacific Corporation renamed the Southern Pacific Transportation Company to Union Pacific Railroad. The Southern Pacific Transportation Company becomes the current incarnation of the Union Pacific Railroad; the former Southern Pacific Transportation Company is still operating as the current incarnation of the Union Pacific Railroad. The Southern Pacific Rail Corporation remained a subsidiary of the Union Pacific Corporation until 2015 when it was merged into the former Southern Pacific Transportation Company, the current Union Pacific Railroad.
Like most railroads, the SP painted most of its steam locomotives black during the 20th century, but after 1945 SP painted the front of the locomotive's smokebox silver (almost white in appearance), with graphite colored sides, for visibility.
As locomotives are being restored, some pacific type 4-6-2 locomotive boilers show signs of having been painted dark green. The soft cover book "Steam Glory 2" by Kalmbach Publications (2007) has an article "Southern Pacific's Painted Ladies" which shows color photos from the 1940s and 1950s revealing that a number of SP 0-6-0 yard engines, usually assigned to passenger terminals were painted in various combinations with red cab roof and cab doors, pale silver smokeboxes and smokebox fronts, dark green boilers, multi colored SP heralds on black cab, green cylinder covers and other details pointed out in color. Some other SP steam passenger locomotives may have been so painted, or at least had dark green boilers. The article indicates that these paint jobs lasted years and were not special paint for a single event.
Some passenger steam locomotives bore the Daylight scheme, named after the trains they hauled, most of which had the word Daylight in the train name. This scheme, carried on the tender, was a bright red on the top and bottom thirds, with the center third being a bright orange. The parts were separated with narrow silver-gray bands. Some of the color continued along the locomotive. The most famous "Daylight" locomotives were the GS-4 steam locomotives. The most famous Daylight-hauled trains were the Coast Daylight and the Sunset Limited.
Well known were the Southern Pacific's unique "cab-forward" steam locomotives. These were 2-8-8-4 locomotives set up to run in reverse, with the tender attached to the smokebox end of the locomotive. Southern Pacific had a number of snow sheds in mountain terrain, and locomotive crews nearly asphyxiated from smoke in the cab. After a number of engineers began running their engines in reverse (pushing the tender), Southern Pacific asked Baldwin Locomotive Works to produce cab-forward designs. No other North American railroad ordered cab-forward locomotives.
Early diesel locomotives were also painted black. Yard switchers had diagonal orange stripes on the ends for visibility, earning this scheme the nickname of Tiger Stripe. Road freight units were black with a red band at the bottom of the car body and a silver and orange "winged" nose. "SOUTHERN PACIFIC" was in a large serif font in Lettering Gray (a very light gray). Railfans call this paint scheme Black Widow. An experimental scheme, all-over black with a variety of orange end and side sill treatments was called the Halloween scheme. Over 200 locomotives were so painted between March 1957 and mid-1958.
Most passenger units were painted originally in the Daylight scheme as described above, though some were painted red on top, silver below for the Golden State (operated with the Chicago, Rock Island and Pacific Railroad) between Chicago and Los Angeles. Silver cars with a narrow red band at the top were used for the Sunset Limited and other trains into Texas. In 1958 SP standardized on a paint scheme of dark grey ("Lark Dark Gray") with a red "winged" nose; railfans dubbed this scheme Bloody Nose. Lettering was again in Lettering Gray.
Anticipating the failed Southern Pacific Santa Fe merger in the mid 1980s, the "Kodachrome" paint scheme (named for the colors of the Kodak boxes that the film came in) was applied to many Southern Pacific locomotives. When the Southern Pacific Santa Fe merger was denied by the Interstate Commerce Commission, the Kodachrome units were not immediately repainted, some even lasting up to the Southern Pacific's end as an independent company. The Interstate Commerce Commission's decision left Southern Pacific in a decrepit state, the locomotives were not repainted immediately, although some were repainted into the Bloody Nose scheme as they were overhauled after months to years of deferred maintenance.
After the 1988 purchase of the Southern Pacific Transportation Company by Denver and Rio Grande Western Railroad's parent company, Rio Grande Industries whose owner was Philip Anschutz, the side lettering on repainted locomotives was changed from SP's serif font to the Rio Grande's "speed lettering" style. The Rio Grande did not retain its identity, as Anschutz felt the Southern Pacific name was the more recognizable. A variation of the Daylight scheme, also known as Popsicles, designed by Chester Mack, was applied to SP's 4 TE-70s, U25Bs repowered with Sulzer diesel engines. Some former SP locomotives largely retained their original Bloody Nose livery, amended with yellow patches and new numbers, following the takeover by Union Pacific.
Southern Pacific road switcher diesels often had elaborate lighting clusters front and rear, with a large red Mars Light for emergency signaling, and often two pairs of sealed-beam headlamps, one on top of the cab and the other below the Mars Light on the nose. Starting in the 1970s SP had cab air conditioning on all new locomotives and the unit is visible on the cab roof. Southern Pacific placed large snowplows on the pilots of their road switchers for the heavy snowfall on Donner Pass. Many Southern Pacific road switchers had a Nathan-AirChime model P3 or P5 air horn with chords distinct to Southern Pacific locomotives in the western states.
The Southern Pacific and Cotton Belt were the only buyers of the EMD SD45T-2 "Tunnel Motor" locomotive. This locomotive was necessary because the standard configuration EMD SD45 could not get a sufficient amount of cool air into the diesel locomotive's radiator while working Southern Pacific's through snow sheds and tunnels in the Cascades and Donner Pass. These "Tunnel Motors" were EMD SD45-2's with radiator air intakes at the locomotive car body's walkway level, rather than EMD's typical setup with fans on the locomotive's long hood roof pulling air through radiators at the top/side of the locomotive's body. Inside tunnels and snow sheds hot exhaust from lead units would accumulate near the top of the tunnel or snow shed and be drawn into the radiators of trailing EMD (non-tunnel motor) locomotives, leading these locomotives to shut down as their diesel prime mover overheated. The Southern Pacific also operated EMD SD40T-2s, as did the Denver and Rio Grande Western Railroad.
Southern Pacific was known for L-shaped engineer's windshields. Introduced by EMD on SD45 demonstrator 4353, this design improves visibility by omitting the pillar which in conventional designs splits the engineer's windshield into two panes. Southern Pacific selected this option on new EMD locomotive orders starting in 1967 through the early 1980s, one of the few railroads to do so (Illinois Central was another buyer of this option), and ordered a similar windshield design from General Electric. After the "wide nose" design became popular, most of Southern Pacific's locomotives kept their L-shaped windshields before being rebuilt or sold to different private railroads after its merger.
Unlike other railroads whose locomotive number boards bore the locomotive number, SP used them for the train number until 1967. (SP's San Francisco-San Jose commute trains continued displaying train numbers for the convenience of passengers.) The other railroad that used locomotive number boards for train numbers into the 1960s was SP's transcontinental partner, Union Pacific.
On either side of the boiler near the smoke stack or further back, indicators are displayed. These are train numbers (figure 1). All trains going toward San Francisco are called 'westward' and are odd-numbered such as 1, 3, and so on. A train going away from SF are called 'eastward' and are even-numbered. The example in figure 1 shows 99 as the train number which is the number of the streamlined Daylight, northbound.
In order to carry all the people wishing to ride on the same train, sometimes it was necessary to operate the train in two or more separate parts, which are called 'sections.' When a train is operated in sections, the first section carries a '1' preceding the train number (figure 2). The second section carries a '2', etc., and the last section carries the train number only. Special trains or 'extras' carry the locomotive number preceded by an 'X' (figure 3).
In 2006, the current Union Pacific Railroad which is actually the former Southern Pacific Transportation Company, unveiled UP 1996, the sixth and final of its Heritage Series EMD SD70ACe locomotives. Its paint scheme appears to be based on the Daylight and Black Widow schemes. Today there are still locomotives in SP paint, including ten AC4400CWs with original SP numbers as of January 2013.
Until May 1, 1971 (when Amtrak took over long-distance passenger operations in the United States), the Southern Pacific at various times operated the following named passenger trains. Trains with names in italicized bold text still operate under Amtrak:
Locomotives Used for Passenger Service
There are many Southern Pacific locomotives still in revenue service with railroads such as the Union Pacific Railroad, and many older and special locomotives have been donated to parks and museums, or continue operating on scenic or tourist railroads. Most of the engines now in use with Union Pacific have been "patched", where the SP logo on the front is replaced by a Union Pacific shield, and new numbers are applied over the old numbers with a Union Pacific sticker, however some engines remain in Southern Pacific "bloody nose" paint. Among the more notable equipment is:
For a complete list, see: List of preserved Southern Pacific Railroad rolling stock.
It all began in Kansas in the late 19th century and came to include a long-distance system created by the Southern Pacific Railroad Internal Network Telecommunications, or SPRINT.