A 21mg dose Nicoderm
CQ patch applied to the left arm
Clonidine tablets and transdermal patch
A transdermal patch which delivers medication is applied to the skin in a medical setting. The patch is labelled with the time and date of administration as well as the administrator's initials.
A transdermal patch is a medicated adhesive patch that is placed on the skin to deliver a specific dose of medication through the skin and into the bloodstream. Often, this promotes healing to an injured area of the body. An advantage of a transdermal drug delivery route over other types of medication delivery such as oral, topical, intravenous, intramuscular, etc. is that the patch provides a controlled release of the medication into the patient, usually through either a porous membrane covering a reservoir of medication or through body heat melting thin layers of medication embedded in the adhesive. The main disadvantage to transdermal delivery systems stems from the fact that the skin is a very effective barrier; as a result, only medications whose molecules are small enough to penetrate the skin can be delivered by this method. A wide variety of pharmaceuticals are now available in transdermal patch form.
The first commercially available prescription patch was approved by the U.S. Food and Drug Administration in December 1979. These patches administered scopolamine for motion sickness.
- The highest selling transdermal patch in the United States of America is the nicotine patch, which releases nicotine in controlled doses to help with cessation of tobacco smoking. The first commercially available vapour patch to reduce smoking was approved in Europe in 2007.
- Two opioid medications used to provide round-the-clock relief for severe pain are often prescribed in patch form, fentanyl CII (marketed as Duragesic) and buprenorphine CIII (marketed as BuTrans).
- Hormonal patches
- Nitroglycerin patches are sometimes prescribed for the treatment of angina in lieu of sublingual pills.
- Transdermal scopolamine is commonly used as a treatment for motion sickness.
- The anti-hypertensive drug clonidine is available in transdermal patch form
- Emsam, a transdermal form of the MAOI selegiline, became the first transdermal delivery agent for an antidepressant approved for use in the U.S. in March 2006.
- Daytrana, the first methylphenidate transdermal delivery system for the treatment of Attention Deficit Hyperactivity Disorder (ADHD), was approved by the FDA in April 2006.
- Vitamin B12 may also be administered through a transdermal patch. Cyanocobalamin, a highly stable form of vitamin B12, is compatible with transdermal patching .
- 5-Hydroxytryptophan (5-HTP) can also be administered through a transdermal patch, which was launched in the United Kingdom in early 2014.
- Rivastigmine, an Alzheimer's treatment medication, was released in patch form in 2007, under the brand name Exelon
- In 2005, the FDA announced that they were investigating reports of death and other serious adverse events related to narcotic overdose in patients using Duragesic, the fentanyl transdermal patch for pain control. The Duragesic product label was subsequently updated to add safety information in June 2005.
- In 2007, Shire and Noven Pharmaceuticals, manufacturers of the Daytrana ADHD patch, announced a voluntary recall of several lots of the patch due to problems with separating the patch from its protective release liner. Since then, no further problems with either the patch or its protective packaging have been reported.
- In 2008, two manufacturers of the Fentanyl patch, ALZA Pharmaceuticals (a division of major medical manufacturer Johnson & Johnson) and Sandoz, subsequently issued a recall of their versions of the patch due to a manufacturing defect that allowed the gel containing the medication to leak out of its pouch too quickly, which could result in overdose and death. As of March 2009, Sandoz--now manufactured by ALZA--no longer uses gel in its transdermal fentanyl patch; instead, Sandoz-branded fentanyl patches use a matrix/adhesive suspension (where the medication is blended with the adhesive instead of held in a separate pouch with a porous membrane), similar to other fentanyl patch manufacturers such as Mylan and Janssen.
- In 2009, the FDA announced a public health advisory warning of the risk of burns during MRI scans from transdermal drug patches with metallic backings. Patients should be advised to remove any medicated patch prior to an MRI scan and replace it with a new patch after the scan is complete.
- In 2009, an article in Europace journal detailed stories of skin burns that occurred with transdermal patches that contain metal (usually as a backing material) caused by shock therapy from external as well as internal cardioverter defibrillators (ICD).
The main components to a transdermal patch are:
- Liner - Protects the patch during storage. The liner is removed prior to use.
- Drug - Drug solution in direct contact with release liner
- Adhesive - Serves to adhere the components of the patch together along with adhering the patch to the skin
- Membrane - Controls the release of the drug from the reservoir and multi-layer patches
- Backing - Protects the patch from the outer environment
- Permeation Enhancer - These are permeation promoters for drugs, which increases delivery of drug.
- Matrix Filler - It provides bulk to matrix as well as some of fillers acts as matrix stiffening agent.
Other components includes: Stabilizer (anti oxidants), Preservatives etc.
Sample transdermal patches. On left is a 'reservoir' type, on the right a 'Single-layer Drug-in-Adhesive' version. Both contain exactly the same level of the same active ingredient with identical release rates.
There are five main types of transdermal patches.
The adhesive layer of this system also contains the drug. In this type of patch the adhesive layer not only serves to adhere the various layers together, along with the entire system to the skin, but is also responsible for the releasing of the drug. The adhesive layer is surrounded by a temporary liner and a backing.
The multi-layer drug-in-adhesive patch is similar to the single-layer system; the multi-layer system is different, however, in that it adds another layer of drug-in-adhesive, usually separated by a membrane (but not in all cases). One of the layers is for immediate release of the drug and other layer is for control release of drug from the reservoir. This patch also has a temporary liner-layer and a permanent backing. The drug release from this depends on membrane permeability and diffusion of drug molecules.
Unlike the single-layer and multi-layer drug-in-adhesive systems, the reservoir transdermal system has a separate drug layer. The drug layer is a liquid compartment containing a drug solution or suspension separated by the adhesive layer. The drug reservoir is totally encapsulated in a shallow compartment molded from a drug-impermeable metallic plastic laminate, with a rate-controlling membrane made of a polymer like vinyl acetate on one surface. This patch is also backed by the backing layer. In this type of system the rate of release is zero order.
The matrix system has a drug layer of a semisolid matrix containing a drug solution or suspension. The adhesive layer in this patch surrounds the drug layer, partially overlaying it. Also known as a monolithic device.
In a vapour patch, the adhesive layer not only serves to adhere the various layers together but also to release vapour. Vapour patches release essential oils for up to 6 hours and are mainly used for decongestion. Other vapour patches on the market improve quality of sleep or aid in smoking cessation.
A transdermal patch is classified by the U.S. Food and Drug Administration as a combination product, consisting of a medical device combined with a drug or biological product that the device is designed to deliver. Prior to sale in the United States, any transdermal patch product must apply for and receive approval from the Food and Drug Administration, demonstrating safety and efficacy for its intended use.
- ^ Segal, Marian. "Patches, Pumps and Timed Release: New Ways to Deliver Drugs". Food and Drug Administration. Archived from the original on 2007-02-10. Retrieved .
- ^ "FDA approves scopolamine patch to prevent peri-operative nausea". Food and Drug Administration. 1997-11-10. Archived from the original on 2006-12-19. Retrieved .
- ^ Nachum Z, Shupak A, Gordon CR (2006). "Transdermal scopolamine for prevention of motion sickness : clinical pharmacokinetics and therapeutic applications". Clinical Pharmacokinetics. 45 (6): 543-66. doi:10.2165/00003088-200645060-00001. PMID 16719539.
- ^ Berner B, John VA (February 1994). "Pharmacokinetic characterisation of transdermal delivery systems". Clinical pharmacokinetics. 26 (2): 121-34. doi:10.2165/00003088-199426020-00005. PMID 8162656.
- ^ Peck, Peggy (2006-03-01). "FDA Approves First Antidepressant Transdermal Patch". Retrieved .
- ^ Cabray, Matthew (2006-04-12). "Transdermal Patch Approved For Treatment Of ADHD". Retrieved .
- ^ "'Revolutionary' 24-hour slow release 5-HTP transdermal patch, launched in early 2014 in the United Kingdom". 5htppatch.co.uk. Retrieved .
- ^ Peck, Peggy (2007-07-10). "Medical News: FDA Approves Rivastigmine Patch for Alzheimer's Disease". Retrieved .
- ^ "FDA ALERT (07/2005): Narcotic Overdose and Death". Food and Drug Administration. 2005-07-15. Archived from the original on 2007-02-20. Retrieved .
- ^ Megget, Katrina (2007-09-05). "ADHD Transdermal Patches Withdrawn". Retrieved .
- ^ Silverman, Ed (2008-02-12). "J&J and Sandoz Recall Fentanyl Patches". Retrieved .
- ^ As stated on the packaging and labels of Sandoz-branded Fentanyl Transdermal System products, revised March 2009.
- ^ "FDA Public Health Advisory: Risk of Burns during MRI Scans from Transdermal Drug Patches with Metallic Backings". Archived from the original on March 7, 2009. Retrieved 2009.
- ^ Brown, MR: "Analgesic patches and defibrillators: a cautionary tale", Europace,2009 Nov;11(11):1552-3
- ^ "Combination Products; FAQ". Retrieved 2012.